多光譜紅外靶標-多孔徑紅外靶標-IR 704紅外輻射源
多光譜紅外靶標-多孔徑紅外靶標-IR 704紅外輻射源 是一套用于測試多波長下真溫場的多光譜目標系統，該系統集成了黑體源、電動光闌轉輪、電動濾光片、高速快門和高速濾光快門等核心部件，被設計為一個強制風冷多光譜、多孔徑目標系統，既可以直接與準直儀/目標投影系統集成在一起，也可以直接作為一個目標系統。系統操作可通過內部微處理器（帶有RS-232/RS-485控制接口或輔助的直接硬件端口）進行控制。
多光譜紅外靶標-多孔徑紅外靶標-IR 704紅外輻射源 包括一個?”腔式黑體源、4孔光闌轉輪、4位濾光片、濾光片控制線圈和快門控制線圈。每部分功能都通過串口命令進行單獨控制，包括黑體溫度控制、孔徑選擇、濾光片選擇、快門控制線圈激活和濾光片控制線圈激活?？扉T和濾光片控制線圈的激活時間小于5ms，可使目標在不到10ms的時間內實現從“關閉”到“雙濾波”再到“濾波”的高速進程。
其獨立控制功能，使IR-704系統的濾光片/孔徑/快門選項以及變溫黑體輻射源（從50oC到1050oC）存在32種不同的組合，這樣提供了接近無限的紅外能量輸出變化。內部黑體由IR-301控制器控制，RS-232接口可遠程控制所有功能。
Infrared Systems Development Corporation (ISDC) was formed in 1997 with the acquisition of Graseby Infrared’s instrument product lines, which were acquired from Infrared Industries (IRI), Infrared Systems (IRS), and Barnes Engineering Company. These products include blackbody sources, spectral radiometer systems, energy modulators and accessories.
The engineering, manufacturing and technical personnel involved with these products since their inception are included in the complement of our personnel.
We have modified and improved many of these products and have developed several new products, such as our infrared detector preamplifiers, and TE Cooled blackbody.
All of our products are developed and manufactured at our facility in Orlando Florida.
We also develop systems for custom applications, and offer design consulting services for many infrared instrument and sub-system projects. Our experienced staff can offer assistance in almost any IR field, and offer suggestions for your system needs. Contact us for more information.
The IR-704 system integrates a Blackbody source, Motorized Aperture wheel, Motorized Filter Wheel, High Speed Shutter and High Speed Filter Shutter. The system was designed as a forced air-cooled Multi-Spectral, Multi-Aperture target system for direct integration with collimator / target projection systems, but can also be used as a direct target system. System operations are controlled by an internal microprocessor with RS-232 / RS-485 control interface, or an auxiliary direct hardware port.
The system is optically arranged with a ?” Cavity Blackbody source, 4 position aperture wheel, 4 position filter wheel, filter solenoid and shutter solenoid. Each of the assets are individually controlled via Serial port commands to allow Blackbody temperature control, Aperture selection, Filter selection, Shutter solenoid activation and Filter solenoid activation. The activation time of the shutter and filter solenoids is less than 5 milliseconds to allow target high-speed progression from Off to Dual filtered to filtered in less than 10 milliseconds. (components pictured on the left)
工作原理：
根據輻射理論，任何物體只要不處于零度（-273.15 ℃），那么在其他任意溫度下都存在熱輻射。處于熱平衡狀態的黑體在半球方向的單色輻射出射度是波長和溫度的函數。在一定的波長下，黑體的單色輻射出射度是溫度的單值函數，可以通過某一波長下的單色輻射出射度的測量來得出黑體的溫度。這就是輻射測溫學的理論基礎，黑體輻射的普朗克輻射定律。
一般來說，紅外熱像儀是利用紅外探測器和光學成像物鏡接收被測目標的紅外輻射能量分布圖形反映到紅外探測器的光敏元件上，從而獲得紅外熱像圖，這種熱像圖與物體表面的熱分布場相對應，但是目前利用熱像儀獲取熱圖像的裝置都是以單波長為主，只能獲取被測目標在某一特定波長下的亮溫場，不能獲得被測目標的真溫場，而多光譜紅外熱像儀則能很好的解決這一問題，那么對于多光譜紅外熱像儀就需要在不同的光譜和不同孔徑的目標下進行校準，ISDC IR-704/301系統包括一個?”腔式黑體源、4孔光闌轉輪、4位濾光片、濾光片控制線圈和快門控制線圈。每部分功能都通過串口命令進行單獨控制，包括黑體溫度控制、孔徑選擇、濾光片選擇、快門控制線圈激活和濾光片控制線圈激活。快門和濾光片控制線圈的激活時間小于5ms，可使目標在不到10ms的時間內實現從“關閉”到“雙濾波”再到“濾波”的高速進程，可用于多光譜紅外熱像儀的各項校準，如分辨率、靈敏度、噪聲等效溫差NETD、最小可分辨溫差MRTD等。
多光譜紅外靶標-多孔徑紅外靶標-IR 704紅外輻射源 應用范圍：
- 多光譜紅外相機校準
- 多光譜紅外熱像儀校準
- 紅外傳感器研究
產品特點：
- 內嵌有黑體源
- 溫度范圍: 50-1050oC
- 系統濾光片/孔徑/快門選項和黑體提供32種組合選項
- 既可單獨使用，也可與其他系統集成
技術參數：
溫度范圍: 50-1050oC
發射器尺寸: 0.25” 腔體
穩定性（短/長）: 0.1C +/- 0.2C
卡具 / 孔徑: 2個轉輪，14個位置
快門響應時間: <5ms
計算機接口: RS-232 / USB
產品尺寸: 目標系統:6.125”H x 8.5” D x 6.125” W (156x216x156mm)
控制器:5.1”H x 13.4”D x 12”W (130x340x304mm)
標簽:輻射黑體源黑體輻射源
